Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Release 5.1.0.0

Released on Nov 20, 2019

New Feature

Priority Key Summary Status
Medium SC-110 Issue:
In SC2019 SP0, Versiontabis not available.

Root cause:
Transition to delivering the SmartChange product via software component

Solution:
The program has been corrected. 		Done
High SC-15 Issue:
The user is not able to choose other e-mail receiver option as they are disabled. Notification e-mail is always sent only to the owner of the transport request that is deleted.

Root cause:
Hardcoded solution

Solution:
The hardcoded solution has been replaced with a read from the table /rtc/tm_opt-enable_mail_opt. 		Done
Medium SC-10 Issue:
Asearch help for the authorization fields is not implemented for reading data remotely from the TMS.

Root cause:
Search help is needed on development system, which will retrieve data from the TMS.

Solution:
Search help for authorization fields has been created. 		Done
Critical SC-6 Issue:
It is not possibleto reset the user settings to default.

Solution:
The new report /RTC/TM_RESET_TO_USER_DEF_SET has been created to reset user settings. 		Done

Bugs

Priority Key Summary Status
Medium SC-174 Issue:
If a new level and status is selected, the TRs are displayed for the selected level, but for previous status.

Root cause:
Programming error; the filter for new status is not performed.

Solution:
The program has been corrected. 		Done
Medium SC-171 Issue:
The e-mails are also sent to users of User Groups where the approver of the previous step is included.

Root cause:
Programming error;the User Group where the current user is included was not taken into consideration.

Solution:
The program has been corrected. 		Done
Medium SC-169 Issue:
Errors 'UUID for Object not found'should notoccur.

Root cause:
Programming error

Solution:
The program has been corrected. 		Done
Medium SC-168 Issue:
Too many lines in Collect Job log of IQ LIB for the same object

Root cause:
All errors are displayed for an object key.

Solution:
The program has been corrected. The modification will prevent a log with too many information for an object and will only display the first error for the object, because following errors are usually dependent on the first error. 		Done
Medium SC-164 Issue:
The Object Comparison display is not working for CDS View objects.

Root cause:
The report to display the differences could not be found,because it was searched with object type instead of data pointer.

Solution:
The program has been corrected. 		Done
Medium SC-65 Issue:
The Object Comparison (Expert Mode) is not working for CDS View objects.

Root cause:
The structure with object information is not found.

Solution:
The program has been updated. 		Done
Medium SC-62 Issue:
In Import Scheduler, when the button 'Select System Queue(s)'is pressed, not all SID and transport levels are displayed.

Root cause:
This was due to a program error.

Solution:
The program has been corrected. 		Done
Medium SC-61 Issue:
The import of the transport request terminates with short dump DBIF_DSQL2_OBJ_UNKNOWN, for program /RTC/SA_SWITCH_TO_UNICODE.

Root cause:
This was due to a program error.

Solution:
The program has been corrected 		Done
Medium SC-60 Requirements:
To be able to sort ascending/descending after SIDs/TM Levels

Issue:
Currently, the users cannot sort in Import Scheduler window after SID/TM Levels.

Root cause:
Functionality not implemented

Solution:
Two new buttons were added to the ImportScheduler window, in order to sort ascending/descending after SIDs/TM Levels. 		Done
Medium SC-31 Requirements:
Starting with SAP NW 7.4 EHP7, there is an available function in SE10, 'Simulate Release', which performs all checks prior to a release, without performing the actual release.

Issue:
New functionality added by SAP, not handled in TM

Root cause:
The standard BADI Before Release is executing during the checks,and TM functionality is executed, inserting the corresponding TR entry in table /RTC/TM_BAD01, even though the TR will not be released.

Solution:
The program has been adjusted. 		Done
Medium SC-29 Issue:
The personal queue display is stuck after finishing the import, due to an automatic refresh of the screen.

Root cause:
If personal queue contains more than 50 entries, the screen is stuck after finishing the import.

Solution:
The program has been corrected by eliminating the automatic refresh. The user has to refresh the queue manually. 		Done
High SC-21 Issue:
The transport with object type VARX will change the original system from DEV to MAINT at synchronization.

Root cause:
The object cannot be found in the original system.

Solution:
The program has been corrected. 		Done
Critical SC-2 Requirements:
In TM, at Content Approval, the notification mail should be sent to all users which are authorized to perform the Technical Approval (next step).

Issue:
In TM, if the user which performs the Content approval has also authorization for technical approval, notification mails will not be sent.

Root cause:
Spam e-mails are avoided if current user has authorization to perform the next step.

Solution:
A new field has beenadded to table /RTC/TM_OPT named SEND_ALL_MAILS. In order to activate the feature request the value for this field should be set to 'X'. 		Done

  • No labels